How To Set Ssd To Ahci
In this commodity, we will present several means to enable AHCI mode for SATA in the BIOS without reinstalling Windows 10 and thus improve the performance, efficiency and power consumption of modern HDD and SSD drives…
Contents:
- How do AHCI and IDE differ?
- Why it'due south better to enable AHCI?
- How practise I ascertain the current operating mode?
- How do I enable AHCI style for SATA in my BIOS without reinstalling Windows 10?
- Method #ane: Enable AHCI manner through the registry
- Method #2: Enabling AHCI mode using Command Prompt
- What to do if important data is lost?
The stable and fast operation of whatever figurer depends on many factors that impact the performance of private components. Ane such gene is the operation mode of the SATA interface, which is responsible for the entire procedure of transferring data from the hard drives.
Mod technologies are non standing still, but are continually evolving, which leads to some conflicts that may occur within the figurer.
For example, an SSD connected via a SATA interface running in the IDE mode, an outdated SATA interface mode that is unable to unlock the potential of today'southward higher-speed drives. This conflict is possible since today's motherboard manufacturers leave their users the opportunity to piece of work correctly with old media without AHCI support.
It should be noted that almost modern motherboards already have the default AHCI style, but such a trouble can happen when installing a more than modern SSD on an older board or when purchasing a motherboard, which was in use, where the IDE mode was set.
How practice AHCI and IDE differ?
IDE is an old SATA interface fashion, which is almost the same as its predecessor PATA (PATA used a wide and thin cable). This mode of operation was popular earlier the widespread introduction of AHCI, which allowed mod drives to realize the full potential of speed and features.
AHCI – is a new fashion of operation through the SATA interface. Operating in this mode allows you to get the maximum efficiency from SSD-drives with a very loftier speed of data recording. Too, the AHCI mode has more economic ability consumption, also equally allows you lot to replace hard drives without shutting down the computer. Working in AHCI mode fully reveals the capabilities of the SATA interface
Why it'southward amend to enable AHCI?
Enabling the AHCI mode in conjunction with a fast hd drive tin can provide a good boost in computer speed, as its writing speed can increase by 10-20%. By enabling AHCI, users will salvage fourth dimension each fourth dimension when they write files.
How practice I ascertain the current operating mode?
To make up one's mind the current operating fashion, follow the next steps:
Pace 1: Enter the "Control Panel" past right-clicking on the "Start" push.
Footstep 2: In the window that opens, select the "Small Icons" display style and click on the "Device Manager" icon.
Stride 3: In the window that will open, click on "IDE/SATA Controllers…", select your hd drive, right-click on it and select "Properties"
The window that opens will display the operating mode
You lot tin can also check the operating mode via BIOS or UEFI. The parameters where the operating style data is located are usually available in "SATA Mode", "Storage options" etc. depending on the motherboard model and firmware
Important: Do not switch modes in BIOS or UEFI, as this will cause the operating system to fail to boot.
How do I enable AHCI fashion for SATA in my BIOS without reinstalling Windows 10?
There are several means to safely switch between the operating modes while maintaining the correct working system functionality.
Method #one: Enable AHCI mode through the registry
Step 1: Start, you need to open the registry editor. You tin practise information technology by right-clicking on the "Starting time" button and and so selecting "Run". In the text field, you lot should enter the command regedit and confirm it with the button "OK".
Step ii: In the opened window, go to HKEY_LOCALMACHINE\ SYSTEM\ CurrentControlSet\ Services\ iaStorV
Stride 4: Go to HKEY_LOCAL_MACHINE\ System\ CurrentControlSet\ Services\ iaStorV\ StartOverride and do the same steps for parameter .
Step 5: Go to HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ storahci, printing twice on Start parameter and set value to
Pace half dozen: Become to HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ storahci\ StartOverride and set up the value to for the parameter named .
Pace vii: Reboot the PC and enter the BIOS, where you need to set the AHCI performance mode. In different models of motherboards, the path to the mode switching screen may accept different names. The screenshot below shows the most common option.
Save changes and reboot your computer in safe mode.
After rebooting, a new SATA driver pack will be installed, and the system will need some other reboot, after which the AHCI mode will enable.
Information technology should exist noted that in some cases, this method does non work, which leads to a "Screen of death" and further reboot.
To test another mode, y'all must return the IDE way in BIOS.
Method #2: Enabling AHCI mode using Command Prompt
Step 1: Turn on your calculator, right-click on the "Start" button and open the "Command Prompt" or "Command Prompt (Admin)"
Step 2: In the window that opens, enter bcdedit /set {current} safeboot minimal and confirm by pressing "Enter".
Footstep three: After completing the operation, you need to reboot the PC, go to the BIOS, and change the operating mode as described in the first method. The computer volition boot in safe fashion and install the necessary drivers. After that, open Control Prompt (Admin) and enter the command bcdedit /deletevalue {current} safeboot. Confirm by pressing "Enter"
Afterwards the adjacent reboot, a new operating style optimized for high-speed SSDs volition exist enabled.
What to do if of import data is lost?
Any manipulation of the hard disk increases the chance of data loss. Especially when it comes to manipulating the disk's functioning manner, etc.
Often in an attempt to enable ACHI manner, users perform actions that damage the logical disk structure. Furthermore, inexperienced users frequently execute commands when enabling ACHI manner via the command prompt that initializes the disk, i.e. all data on the disk is destroyed and the initial settings are made.
So be very careful about whatever manipulations with the disk.
If you notice the disappearance of important files or problems with local drives – immediately restore the information to a safety place. Otherwise, yous may lose your information irretrievably.
To recover the information download and install RS Partition Recovery.
The programme allows you to recover the data lost due to accidental deletion of files, drive formatting, damaged the logical structure of the drive, and in many other cases.
In addition, RS Partition Recovery supports ALL types of modern file systems. So y'all can recover files not only from Windows drives but likewise from those that worked in other operating systems (including the servers).
Note: Make sure that you select a drive that is different from the one where the file was previously stored as the location for writing the recovered files. It will avoid overwriting the file.
For this reason, RS Sectionalization Recovery allows you to write recovered files to a separate hard disk drive or local disk (or flash drive), compress the recovered information in a ZIP archive, or ship information technology to an FTP server immediately.
Oftentimes Asked Questions
How To Set Ssd To Ahci,
Source: https://recoverhdd.com/blog/enable-ahci-mode-for-sata.html
Posted by: kellydedge1977.blogspot.com
0 Response to "How To Set Ssd To Ahci"
Post a Comment